As seen on
True adjustability: Adjusting an Ezipier head is done by turning a nut not by removing bolts or tek screws.
Safe perimeter: Because Ezipier heads are designed for a flush finish there are no protruding components to hurt you when walking by.
Clear termite inspection point: Solid threaded rod – simple and easy to inspect, doesn’t interfere with cladding (note ant caps which can interfere with cladding are still only inspection points not “barriers”).
Base plate protector: The first pier system to provide a high capacity (5mm thick) composite protector to separate the base plate from the concrete footing for added protection against ponding of water.
Affordable flexibility & convenience: The range of Ezipier heads have been designed to suit standard post sizes to handle most residential loads of up to 5m heights and for ease of purchase from local merchants.
Protection: Now you have the option to choose posts with higher protection when required to suit site conditions such as coastal areas.
Non-combustible: Can be used in bushfire prone areas.
Other trademarks on the site are the property of their respective owners as follows: MAXI-TUBE® and Allgal® are registered trademarks of Orrcon Steel, Red Alert® is a registered trademark of Tilling Timber, Hyspan® is a registered trademark of Carter Holt Harvey Woodproducts Australia, Duragal® and Supagal® are registered trademarks of OneSteel Trading.